Aligning a BC Unswitched Lampholder

After installing and wiring your lampholder you find it is not working please check the quick signs of a blown light bulb etc.

If it's not the light bulb for example please read the following help file about the alignment.

Some of the un-switched lampholders need to have the 3 parts lined up or the lamp will not work when connected. Please make sure these parts are aligned.


There are indents on the side of the 3 parts and these must all line up together.



When fitted you can check like this. The 2 slots of the lampholder will be 180 deg. from the 2 pins. This is what you need to ensure the contact of the lamp makes contact to the lampholder.

Was this article helpful?
20 out of 20 found this helpful



Please sign in to leave a comment.