Aligning a BC Unswitched Lampholder

After installing and wiring your lampholder you find it is not working please check the quick signs of a blown light bulb etc.

If its not the light bulb for example please read the following help file about the alignment.

Some of the un-switched lampholders need to have the 3 parts lined up or the lamp will not work when connected. Please make sure these parts are aligned.

 

lampholder-lined-up-with-arrows-ls.jpg

There are indents on the side of the 3 parts and these must all line up together.

 

un-switched-lampholder-correct-top-ls.jpg

When fitted you can check like this. The 2 slots of the lampholder will be 180 deg. from the 2 pins. This is what you need to ensure the contact of the lamp makes contact to the lampholder.

Was this article helpful?
14 out of 14 found this helpful

Comments

0 comments

Please sign in to leave a comment.